Air-Powered Roll-Out Shelving
Air powered roll out shelf racks are ideally suited for large items. Shelf capacities to 40,000 lbs. Top of unit capacities to 100,000 lbs. Shelf widths up to 40 feet and shelf depths up to 10 feet. Our most popular air-powered roll-out racks feature roll-out shelves that are equipped with an automatic safety interlock that locks all other shelves in when one shelf is rolled out.
AP1
Modular storage systems with powered shelves that roll on the floor. The top of the units can store up to 10,000 lbs.
AP2
Safety rails can be added to the top of the unit.
AP3
With air-powered shelves you simply have the shelf come out, hook on with the overhead crane, and set the item directly into the machine.
AP4
This unit was designed to store 8 smaller molds per shelf and 6 large molds on top of the unit.
AP5
Blocking can be added to the shelves that will allow for items to be picked up with slings or forklifts.
AP6
This unit was designed to store 4' square molds weighing 10,000 lbs. each.
AP7
Rollers can be stored with pans on the drawers and on the top of the unit with removable blocking that can be made from wood or other materials.
AP8
Air-powered units can be used for storing large printing cylinders. Printing cylinder cradling can be made of aluminum, UHMW, or steel with neoprene.
AP9
Oil well drill racks with UHMW cradling to fit the contour of the drills. Oil well drills range from 20 to 40 feet long and are normally stored on blocks one high on the floor. This rack allows the customer to safely store four times as many in the same floor space.
AP10
Mold Storage Units with Push Button Controls
This unit is used by one of the leading manufacturers of automotive parts. It is used in several locations in this country and also in Mexico. It is ideally suited for storing dies and molds. It is complete with air filter, oiler, and regulator. It is simply connected to air line with a jiffy disconnect. Shelf capacities are from 5,000 lbs. to 20,000 lbs. per shelf.
AP11
Powered shelves that roll on the floor are more economical than air-powered cantilevered shelves.
AP12
Over one-half a million pounds of injection molds were efficiently stored in these roll-out shelf units, requiring less than 1,000 square feet of valuable floor space.